teamzr1
Supporting vendor
A new season of racing marks a new start to the Corvette Racing program. The three-day Roar Before the 24 at Daytona International Speedway is the annual preview ahead of the IMSA WeatherTech SportsCar Championship, which will look very different for familiar with the Corvette brand.
Instead of one or two Corvette GT cars running around the 3.56-mile infield road course as has been tradition for the 25 years, a quartet of the new Chevrolet Corvette Z06 GT3.R racecars are set for the Roar – one week before the season-opening Rolex 24 At Daytona.
The quartet of Corvettes will be spread out in two classes of the WeatherTech Championship: Corvette Racing by Pratt Miller Motorsports in GTD (GT Daytona) PRO and AWA in GTD. Nine GM factory drivers dot the roster of four cars.
• Corvette Racing by Pratt Miller Motorsports: Antonio Garcia, Alexander Sims, Daniel Juncadella (No. 3 Oshkosh / Mobil 1 Corvette); Tommy Milner, Nicky Catsburg, Earl Bamber (No. 4 Oshkosh / Mobil 1 Corvette)
• AWA: Orey Fidani, Matthew Bell, Lars Kern, Alex Lynn (No. 13 Corvette); Anthony Mantella, Nico Varrone, Thomas Merrill, Charlie Eastwood
The official competition debut of the Corvette Z06 GT3.R comes almost 15 months from the first time the initial test car turned its wheels for the first time on a track. Since that time, continued testing and development has come at circuits around the United States and at Chevrolet’s Driver in the Loop (DIL) simulator.
The Corvette Z06 GT3.R is Chevrolet’s first car built to global GT3 regulations. It’s based on the production Corvette Z06 supercar with the two sharing a significant amount of DNA.
The racecar is built on the same production aluminum chassis frame from Chevrolet’s Bowling Green (Ky.) Assembly plant – as the road-going Z06. Similar carbon-fiber splitters for front downforce, and the surface area from the top of the windshield to the rear of the Z06 remained intact on the Z06 GT3.R. That includes side air ducts behind the doors directly inspired by Z06 production road car that help to cool the engine, transaxle and rear brakes.
The similarities carry over to the hand-built 5.5L, flat-plane crankshaft V8 engine in the Z06 GT3.R. Both original from the Bowling Green factory with the racing version sharing 80 percent of the production content from the Z06, including the crankshaft, connecting rods, cylinder heads, fuel injectors, coils, gaskets and a variety of other sensors.
Corvette’s latest racing challenger benefits from a legacy of previous race- and championship-winning racecars. Three previous generations of Corvette – C5-R, C7.R and C8.R have visited Victory Lane at Daytona with the program claiming four previous class victories.
The goal for this year’s Rolex is to claim Victory No. 5… and No. 6.
The Roar Before the 24 is set for Friday-Sunday with GTD PRO and GTD qualifying for the Rolex 24 scheduled for 1:55 ET p.m. on Sunday. The session will stream live around the world on IMSA.com.
CORVETTE RACING BY PRATT MILLER MOTORSPORTS PRE-EVENT DRIVER QUOTES
ANTONIO GARCIA, NO. 3 OSHKOSH / MOBIL 1 CHEVROLET CORVETTE Z06 GT3.R:
“I’ve raced the Rolex 24 many times but I think I’m looking forward to this year more than almost any previous ones. Obviously we have the new Corvette to debut in a race for the first time, and that is exciting for all of us. It’s a new chapter for us as drivers and everyone at Corvette and Pratt Miller.
The Z06 GT3.R has a lot of potential as we’ve seen in testing so let’s see how things play out first at the Roar. Sharing the No. 3 car with Alexander and Dani also is something new for me, and I’m very happy about it. Of course Alex has a good history with this team, and Dani is a very tough and fast competitor as he has proven against us in the past. I’m happy to race with him and not against him!”
ALEXANDER SIMS, NO. 3 OSHKOSH / MOBIL 1 CHEVROLET CORVETTE Z06 GT3.R:
“It’ll be great to do some more laps in the new Corvette and get a better feeling for it following the testing we’ve already had. We keep improving things, which is what you want. There are some things that I’m still trying to get my head around like the ABS, so having some more laps is always a good thing. It’s cool and exciting to get the season kicked off.
The Roar is a nice, soft start to the year with three days at Daytona. Hopefully the weather is friendly for us. It should be nice. Overall I’m looking forward to getting everything kicked off with Antonio, Dani and the team. I’ve never worked directly with Antonio, Dani or Andy Ramsey, our engineer. So it will be nice to start working together in a more competitive environment as the season progresses. So far it seems like it is a recipe for good things to come.”
Instead of one or two Corvette GT cars running around the 3.56-mile infield road course as has been tradition for the 25 years, a quartet of the new Chevrolet Corvette Z06 GT3.R racecars are set for the Roar – one week before the season-opening Rolex 24 At Daytona.
The quartet of Corvettes will be spread out in two classes of the WeatherTech Championship: Corvette Racing by Pratt Miller Motorsports in GTD (GT Daytona) PRO and AWA in GTD. Nine GM factory drivers dot the roster of four cars.
• Corvette Racing by Pratt Miller Motorsports: Antonio Garcia, Alexander Sims, Daniel Juncadella (No. 3 Oshkosh / Mobil 1 Corvette); Tommy Milner, Nicky Catsburg, Earl Bamber (No. 4 Oshkosh / Mobil 1 Corvette)
• AWA: Orey Fidani, Matthew Bell, Lars Kern, Alex Lynn (No. 13 Corvette); Anthony Mantella, Nico Varrone, Thomas Merrill, Charlie Eastwood
The official competition debut of the Corvette Z06 GT3.R comes almost 15 months from the first time the initial test car turned its wheels for the first time on a track. Since that time, continued testing and development has come at circuits around the United States and at Chevrolet’s Driver in the Loop (DIL) simulator.
The Corvette Z06 GT3.R is Chevrolet’s first car built to global GT3 regulations. It’s based on the production Corvette Z06 supercar with the two sharing a significant amount of DNA.
The racecar is built on the same production aluminum chassis frame from Chevrolet’s Bowling Green (Ky.) Assembly plant – as the road-going Z06. Similar carbon-fiber splitters for front downforce, and the surface area from the top of the windshield to the rear of the Z06 remained intact on the Z06 GT3.R. That includes side air ducts behind the doors directly inspired by Z06 production road car that help to cool the engine, transaxle and rear brakes.
The similarities carry over to the hand-built 5.5L, flat-plane crankshaft V8 engine in the Z06 GT3.R. Both original from the Bowling Green factory with the racing version sharing 80 percent of the production content from the Z06, including the crankshaft, connecting rods, cylinder heads, fuel injectors, coils, gaskets and a variety of other sensors.
Corvette’s latest racing challenger benefits from a legacy of previous race- and championship-winning racecars. Three previous generations of Corvette – C5-R, C7.R and C8.R have visited Victory Lane at Daytona with the program claiming four previous class victories.
The goal for this year’s Rolex is to claim Victory No. 5… and No. 6.
The Roar Before the 24 is set for Friday-Sunday with GTD PRO and GTD qualifying for the Rolex 24 scheduled for 1:55 ET p.m. on Sunday. The session will stream live around the world on IMSA.com.
CORVETTE RACING BY PRATT MILLER MOTORSPORTS PRE-EVENT DRIVER QUOTES
ANTONIO GARCIA, NO. 3 OSHKOSH / MOBIL 1 CHEVROLET CORVETTE Z06 GT3.R:
“I’ve raced the Rolex 24 many times but I think I’m looking forward to this year more than almost any previous ones. Obviously we have the new Corvette to debut in a race for the first time, and that is exciting for all of us. It’s a new chapter for us as drivers and everyone at Corvette and Pratt Miller.
The Z06 GT3.R has a lot of potential as we’ve seen in testing so let’s see how things play out first at the Roar. Sharing the No. 3 car with Alexander and Dani also is something new for me, and I’m very happy about it. Of course Alex has a good history with this team, and Dani is a very tough and fast competitor as he has proven against us in the past. I’m happy to race with him and not against him!”
ALEXANDER SIMS, NO. 3 OSHKOSH / MOBIL 1 CHEVROLET CORVETTE Z06 GT3.R:
“It’ll be great to do some more laps in the new Corvette and get a better feeling for it following the testing we’ve already had. We keep improving things, which is what you want. There are some things that I’m still trying to get my head around like the ABS, so having some more laps is always a good thing. It’s cool and exciting to get the season kicked off.
The Roar is a nice, soft start to the year with three days at Daytona. Hopefully the weather is friendly for us. It should be nice. Overall I’m looking forward to getting everything kicked off with Antonio, Dani and the team. I’ve never worked directly with Antonio, Dani or Andy Ramsey, our engineer. So it will be nice to start working together in a more competitive environment as the season progresses. So far it seems like it is a recipe for good things to come.”