Latest activity
-
Just buffed the door tops with Farécla G360 on a "high cut" wool pad to remove any sanding marks and then with a "cutting pad" to refine... -
Steven Smith replied to the thread Painting my C4.Just buffed the door tops with Farécla G360 on a "high cut" wool pad to remove any sanding marks and then with a "cutting pad" to refine... -
-
Ray Quayle replied to the thread 2026 AGM Minutes.And they give y’all driver licenses? 😂 -
Ssharrig replied to the thread Washer Wiper tubes and jets.Thank you very much for your reply.
-
Ssharrig replied to the thread Washer Wiper tubes and jets.Thank you very much for your reply
-
Been getting down and dirty cleaning up a wrangler jeep for some summer/winter fun , an import from australia so nice option of air con... -
Blackzed replied to the thread C6 coilivers.Do remember that when you set it up there is a factory rake front to back, I believe it is 3mm or 5mm. Without this it will get floaty...
-
Well bought it , all good so far 👍 Not a single reply , forums have died , everything is awful facebook it seems -
DDorsetsteve replied to the thread C6 coilivers.I don’t know what the previous owner did or didn’t do in the set up respect. The type of split with lighter fronts seems to be typical...
-
teamzr1 replied to the thread C6 coilivers.You have to measure what the corner weight at each wheel is as I showed on my website write-up where I corner measured and then adjust... -
DDorsetsteve replied to the thread C6 coilivers.Mines on Yellow Speed Racing ones, fitted by a previous owner. From what I understand they are on 8kg front 10kg rear. The ride is...
-
teamzr1 replied to the thread C6 coilivers.Requires you thinking about the coilovers you choose, the spring rates front/rear and if the shock's mounts are correct with the...
