Latest activity
-
Before looking for another HVAC head It is common for solder joints to crack and easy to open the unit and reflow solder joints Here is... -
C5Steve replied to the thread Wanted C5 Climate control unit.I've done this, one tip. Buy a cold heat soldering iron, it'll prevent you overheating the joints and damaging the resistors. That's it... -
Custom exotics replied to the thread C5 Radio.Another c5 double din as well but this one we added a sub and amp into luggage area -
-
Custom exotics replied to the thread C5 Radio.C5 with a double din conversion still running the Stoke bose speakers with the pac loom adapter
-
-
teamzr1 replied to the thread Wanted C5 Climate control unit.This is a write-up I did in 2019 on my forum There is a common failure point for all C5 HVAC controller head in where the LCD screen... -
teamzr1 replied to the thread Wanted C5 Climate control unit.The cracks in the solder joints are slight so have to look real close I suggest go ahead and reflow solder joints on all of them if you...
-
WWingc5 replied to the thread Wanted C5 Climate control unit.That's awesome, going to give it a go asap. Thanks for the info.
-
teamzr1 replied to the thread Wanted C5 Climate control unit.Yes Sir Look at the first photo and see how dim the numbers are and then the second photo is after I reflowed the solder joints of the...
-
WWingc5 replied to the thread Wanted C5 Climate control unit.Sorry to hijack the thread but are these resistor packs the reason for the HVAC not illuminating? My unit works fine but the lights are...
-
Excess C1 parts list that will be added to: Front Windshield lower stainless trim £220. Set of 4 hubcaps for 1959-62 £400. 1957 Rev... -
teamzr1 replied to the thread Just Curious C8 OPF delete.Owners of 2020–2025 Corvettes may install an aftermarket exhaust system on their vehicle in an effort to change the performance...
