Latest activity
-
CCartechblue reacted to Danvette's post in the thread 1999 C5 Coupe Auto, 59k miles £13,500 with
Like.
Torch Red C5 Corvette Coupe (targa), 58, 900 miles, originally supplied to Japan with factory-fitted Euro spec options like headlights... -
CC5 VTY No plate on retention ,transfer paid £425.00. Ono
-
antijam replied to the thread Recurrent misfiring problem.No, didn't watch the lifters with the valve cover off. All the lifters seem to be seated properly and none of the pushrods obviously... -
IIoM Mike replied to the thread Servicing and diagnostics.Thanks for the update! I'll try the Parts USA guys as recommended. Yeah, I really like the new crop of muscle cars. I rented a few in...
-
IDoubt there's anyone on the island to do this. Some stuff can be DIY'ed , I suppose, like oil changes , brakes and whatnot. As regards a...
-
NNigel curry replied to the thread Headlights.Sounds good to me thanks guys
-
CaptainK replied to the thread Headlights.Sure can yes. I was doing something similar when I was converting my original vacuum headlights to electric motors. The springs will... -
CaptainK replied to the thread Purple People eater has passed her MOT today.Nice. Looks good in purple.
-
CaptainK reacted to purple charlie's post in the thread Purple People eater has passed her MOT today with Like.
thanks to all that have helped me over the last few months. Having had a Chevy Berlinetta and a 3rd Gen Trans Am in the past. Late life...
-
FFatbloke-Dim replied to the thread Servicing and diagnostics.Doubt there's anyone on the island to do this. Some stuff can be DIY'ed , I suppose, like oil changes , brakes and whatnot. As regards a...
-
teamzr1 replied to the thread Recurrent misfiring problem.Is exhaust system dual or single and does your C3 have CAT converters ? -
teamzr1 replied to the thread Recurrent misfiring problem.Could be just a bit of carbon buildup between face of valve and seat that would not be clearly seen in compression test, but enough to...
-
-
antijam replied to the thread Recurrent misfiring problem.1. No, I haven't re-torqued the head or manifold bolts. I'm reluctant to disturb a head that is showing acceptable compression after...
-
-
-
Anglia318 replied to the thread Oil pressure take off..This would screw in the block .. fit a flexy to a brass 1/8 block / manifold connect the original pipe to the block/ manifold and use...
-
