Latest activity
-
teamzr1 replied to the thread Recurrent misfiring problem.Since you going through all the time and effort, while having intake off I would hand rotate the engine and assure the lifters are... -
antijam replied to the thread Recurrent misfiring problem.I use this Gunson timing lamp. With the engine running I simply fit the inductive pick-up on each HT lead in turn and pull the trigger... -
teamzr1 replied to the thread Servicing and diagnostics.Sounds like a crap tune by Hennessey, but that is common with them :-( If you only have a DTC (code) reader, depending on if its worth...
-
antijam replied to the thread Recurrent misfiring problem.That's exactly what I'll do when I get the manifold back on. (y)
-
IIoM Mike replied to the thread Servicing and diagnostics.Many thanks for this! Would a OBD2 scanner pick up the fault from the OBD module? My car can be running fine and then switch off for a...
-
IThe PCM and EBTCM controllers is designed to protect the car from going bonkers due to having drive by wire If it reads from the...
-
teamzr1 replied to the thread Servicing and diagnostics.The PCM and EBTCM controllers is designed to protect the car from going bonkers due to having drive by wire If it reads from the...
-
Oneball reacted to purple charlie's post in the thread Purple People eater has passed her MOT today with
Like.
thanks to all that have helped me over the last few months. Having had a Chevy Berlinetta and a 3rd Gen Trans Am in the past. Late life... -
Oneball replied to the thread Recurrent misfiring problem.You said you determined which cylinder was misfiring with a timing light? How did you do this and what sort of timing light do you have?
-
teamzr1 replied to the thread Recurrent misfiring problem.Really cannot see close enough in that 1 photo as valvetrain for both heads It seems looking at how much the manifold gasket was...
-
-
CCartechblue reacted to Danvette's post in the thread SOLD 1999 C5 Coupe Auto, 59k miles £13,500 with Like.
Torch Red C5 Corvette Coupe (targa), 58, 900 miles, originally supplied to Japan with factory-fitted Euro spec options like headlights...
-
CC5 VTY No plate on retention ,transfer paid £425.00. Ono
-
antijam replied to the thread Recurrent misfiring problem.No, didn't watch the lifters with the valve cover off. All the lifters seem to be seated properly and none of the pushrods obviously...
-
IIoM Mike replied to the thread Servicing and diagnostics.Thanks for the update! I'll try the Parts USA guys as recommended. Yeah, I really like the new crop of muscle cars. I rented a few in...
-
IDoubt there's anyone on the island to do this. Some stuff can be DIY'ed , I suppose, like oil changes , brakes and whatnot. As regards a...
