Latest activity
-
CaptainK replied to the thread What have you done today.... or just not bother replacing some of the rubber seals around the window. :ROFLMAO: -
Nassau65 replied to the thread What have you done today.I wouldn’t bother. You want fresh air ? Roll the window down 😂 -
Spotted at the garden centre whilst out and about with wife and child. Went over to have a look at this marvellous C1 Corvette to find...
-
-
CaptainK replied to the thread What have you done today.Dang. Another vacuum operated piece of kit in the car. I've electrified my wiper door and headlights and was planning on getting rid...
-
Forgot to update the final product. Been busy enjoying it :) Lots if nibs needed to be removed. 1500G did the job then a compound...
-
Krusty replied to the thread Very loud creaking from the steering rack.Good advice! Next time I get the pleasure of using a 2/4 post ramp, I might just do that for good measure anyway 👍 -
Your lucky then as if the right side also got loose and going into a turn and the rack slide to one side Good to hear you got that...
-
teamzr1 replied to the thread Very loud creaking from the steering rack.Your lucky then as if the right side also got loose and going into a turn and the rack slide to one side Good to hear you got that... -
Krusty replied to the thread Suddenly 'sloppy' gear shifter (automatic).Yes! Thats the one. That clip that pushes in to secure the cables length after fitment, had half come out. I simply pushed it back in...
-
Krusty reacted to teamzr1's post in the thread Suddenly 'sloppy' gear shifter (automatic) with
Like.
You mean here ? -
Krusty replied to the thread Very loud creaking from the steering rack.We have a result!!! I've dodged the rain, jacked the car up and found the left/drivers side bolt was slack! I got a really good turn on...
-
-
Steering Gear: Specifications Power Steering Gear: Inlet Hose To Power Steering Gear 27 Nm (20 ft. lbs.) Mounting Bolt Nuts To...
-
Krusty reacted to Llewelyn's post in the thread Very loud creaking from the steering rack with Like.
Also make sure your steering UJ is tight where the steering shaft connects to the rack…!
-
Krusty replied to the thread Suddenly 'sloppy' gear shifter (automatic).FOUND IT!!!!! The little plastic clip on the gearbox end had half unclipped itself. I clipped it back in, shifts normally now 👍 Any...
