HT lead lengths

Andy K

CCCUK Member
Hi.
I've posted this in the C1 section, but the information requested is probably the same for a standard C2 with a points distributor and the original exhaust manifold.......
"Has anyone got information on the lengths for the HT leads on a standard 1960 283 engine? The ones on the set I currently have are far too long and some actually sit on the chassis rails! Any photos, or links to photos, with the routing and lead separators would be helpful too."

My C2 has aftermarket headers and the HT leads run along the rocker covers and then vertically down, so might be too short for measuring purposes.
With thanks,
Andy K
 

Adtheman

CCCUK Member
Hi.
I've posted this in the C1 section, but the information requested is probably the same for a standard C2 with a points distributor and the original exhaust manifold.......
"Has anyone got information on the lengths for the HT leads on a standard 1960 283 engine? The ones on the set I currently have are far too long and some actually sit on the chassis rails! Any photos, or links to photos, with the routing and lead separators would be helpful too."

My C2 has aftermarket headers and the HT leads run along the rocker covers and then vertically down, so might be too short for measuring purposes.
With thanks,
Andy K
Hi
You can buy a Moroso kit and cut the leads to length yourself. I bought mine from CK admittedly he made them up for me but I don’t think there’s a lot to it. You’ll have them custom length then too.
 
Top