C3 rear window louvres – anyone interested in a remake?

Chuffer

CCCUK Member
For the racers types
Another way to increase performance is reducing unsprung weight

For my 1994 Snake skinner ZR-1 I took the rear hatch glass off and it weighed over 50 pounds

I used the glass as a mold and made a Lexan one made which only weighed 12 pounds
First high speed ORR running speeds of 150-180 MPH I happen to look back and due to pressure and air movement
the Lexan was flapping like bird wings ! (latch in center) :)

I had to make up some rails on sides of hatch to lock the sides from not doing that
Lexan is a bit not as clear as glass but did the job

View attachment 34346
Lexan scratches easily too but you will never put a hammer or a shot gun blast at close range through it !
 

Roscobbc

Moderator
I recall many years ago as a teen on my then less than trusty early 50's iron headed Triumph 110 returning back on a late afternoon via the A127 from Southend to Romford on one of those (then very frequent) typical foggy days when dense fog would descent in minutes in large patches and lift just as quickly.
Back then (late 60's) there were regular serious multi vehicles pile-ups all over the UK caused by foggy conditions.
I had pulled in to a layby to check out the rather inadequate bike lighting and was fascinated by the way that fog tends to mute sounds.......there was obviously an accident some way along the opposite carriageway behind me - one could hear the faint 'crump' of successive cars running in to the back of other vehicles in the gloom.....I was transfixed as the sounds got louder with more and more cars colliding and the queue in the opposite carriageway got nearer and nearer.......eventually a rather nice looking Austin Cambridge managed to stop without running in to the back of another car directly opposite.
Then another 'crump' as a Reliant Regal ran in to the rear of the Austin.........and the whole front end, wings, bonnet etc of the three pin plug simply broke-off at the cabin and fell off in front!
It was probably one of the most bizarre, yet strangely funny things I have ever seen. Made even more bizarre as the driver of the Reliant got out of the vehicle dragged the rather crumpled (but intact) detached fibreglass front end on to the the grass verge and (presumably) after exchanging details with the other car driver appeared to drive-off (less his front end) - traffic had then partly cleared.
 

CaptainK

Moderator
Back to louvres, just earlier today I saw a post somewhere else on the internet of a earlier (non chrome bumper) C3 barn find that had had some Ecklers modification in the past to make it a hatchback, complete with louvres on it. Didn't know about that one.
 

Nassau65

CCCUK Member
Back to louvres, just earlier today I saw a post somewhere else on the internet of a earlier (non chrome bumper) C3 barn find that had had some Ecklers modification in the past to make it a hatchback, complete with louvres on it. Didn't know about that one.
Yes, ecklers offered conversions to turn the large back window into a hatchback long before Chevrolet did it for the 1982 collector edition.
Many wondered why it took them so long.
 

Nassau65

CCCUK Member
Was always on the fence with the sports wagon conversions. Some were obviously completed better than others.
Grown to like them as I’ve gotten older and became more fond of estates as we brits call wagons.
Now this one I like
IMG_1843.jpeg
 

Chuffer

CCCUK Member
There was a Sport Wagon at the CCCUK Nationals a few years back when it was still held at Sharnbrook . It was the only one I have seen in the flesh and rather than a camera angle shot and still didn`t like it . The only sport wagon ( shooting brake) conversion that really worked as resolved design IMO was the Lynx Eventer on a Jaguar XJS . 1986_jaguar_xj-s_v12_he_6.1-litre_lynx_eventer_sports_estate_4.jpg
 

Nassau65

CCCUK Member
Of course the Jag looks sleeker and more “stylish “, but there was 20 odd years of design between them . The Aston does look old fashioned in comparison.
 

Roscobbc

Moderator
Was always on the fence with the sports wagon conversions. Some were obviously completed better than others.
Grown to like them as I’ve gotten older and became more fond of estates as we brits call wagons.
Now this one I like
View attachment 34353
Interesting that it has initially what appear to be a stock wheel and tyre combo.........but look at the size of the flared arches!
Wonder if that meant narrowed inner wheel arches and more internal space in the bed area?
 

Nassau65

CCCUK Member
Never had the chance to have a look inside the “cargo” area to see what’s it like. Love the flared arches on the pictured one, never seen that before. Some of the ones I’ve seen over the years looked a bit rough to me.
Would certainly be interested in getting a nice one today.
 

Nassau65

CCCUK Member
Didn’t know the factory did conversions.
Only ever seen one, a British racing green version many years ago. Looked lovely. Serious money nowadays, but as they were always special they were always good money. You paid for the rarity.
 

Nassau65

CCCUK Member
US estates were a big part of my growing up. From the mid sixties we always had an estate on hand. Me, my little sister and two large dogs ( Alsatians/ Great Danes) travelled everywhere in them. Dad preferred GM models mostly Chevrolet but did venture to other brands including Rambler, especially as they did RHD conversions. He bought the last 3 RHD models they had at their Acton premises.
We only went there to get some “wooden “ panel trim/skin and saw these unsold examples just sitting in the corner. As it was all closing down he must have got a good deal on them.
 

Roscobbc

Moderator
I loved the concept of a Ford Country Sedan or Country Squire and the option for jump seats in the rear deck allowing 10 seats.......and still room for a couple of suitcases inside - makes a joke of todays 7/8 seat cars.
fd1967countrysquire58449726.jpg

fd1967countrysquire58449725.jpg
 
Top