Latest activity
-
Just to finish this off, fitting the rest of the ducting took several goes as I again managed to keep trapping wires and hoses. The... -
PBefore i get in a mess, presumably this is the c100 connector, cant get it apart has been sealed with black mastic.sits behind the battery
-
-
Just to finish this off, fitting the rest of the ducting took several goes as I again managed to keep trapping wires and hoses. The... -
Made a bit of progress today, cleaned everything up (it was all pretty dusty) and fitted the new matrix to the frame. All the seals on...
-
johng replied to the thread Heater matrix replacement.Just to finish this off, fitting the rest of the ducting took several goes as I again managed to keep trapping wires and hoses. The... -
-
-
-
Made a bit of progress today, cleaned everything up (it was all pretty dusty) and fitted the new matrix to the frame. All the seals on... -
CaptainK reacted to Mad4slalom's post in the thread If it ain't broke, don't fix it...... with
Like.
Just looking at this old post, l had not seen a shot from the front with lights raised for a while,… The chrome era vettes just look so... -
After a couple of months of terrible weather it's been good to get out in the garage again to continue work on the C3. Brakes have been...
-
Ssplit window coupe replied to the thread Early Corvette Blue Prints.The mystery that surrounds Kelsey Hayes and the 63 RPO P48 Aluminium knock off wheels and spinners. On May 7 1962 Bunkie Knudsen...
-
rubyragtop replied to the thread C4 ZR1 Parts Required.Hi Charlie try Parts USA in Stockport, they are now authorised Corvette service agents and used to sell new in the past so worth a try. -
rubyragtop replied to the thread C4 ZR1 Parts Required.
-
Keep in mind being the oil filter for LT5 is mounted at top and upside-down the filter has a check valve to prevent no oil on startup...
-
teamzr1 replied to the thread C4 ZR1 Parts Required.Keep in mind being the oil filter for LT5 is mounted at top and upside-down the filter has a check valve to prevent no oil on startup...
