Latest activity
-
teamzr1 replied to the thread Clarkys Corvette C5.On the far left of dash do you have the switch for fog lights by the switch for hatch release ? Do you see on the sticker of console... -
-
DDorsetsteve replied to the thread Project black hole sun..Very much understood coming from a twin turbo car with over 30ft of induction piping and the MAF at the start! All sorted now and hence...
-
DThe MAF reports to the PCM the amount of air mass flowing through it, the higher the engine RPMs is the more air mass will be flowing...
-
teamzr1 replied to the thread Project black hole sun..The MAF reports to the PCM the amount of air mass flowing through it, the higher the engine RPMs is the more air mass will be flowing...
-
CClarky replied to the thread Clarkys Corvette C5.So I have had the front end repaired and repainted and I also a while ago bought 2 new/old stock front fogs that the car was optioned...
-
-
DDorsetsteve replied to the thread Project black hole sun..Thanks for that. I had the appropriate hose clamp so dealt with that straight away. PCV makes sense.
-
Wouldn't expect anything less from a former Fix Or Repair Daily exec' -
-
Blackzed replied to the thread Project black hole sun..Green one is the PCV connection as far as I know. You need the hose clamp on otherwise its possibly sucking air in. The rubber part is...
-
DDorsetsteve replied to the thread Project black hole sun..Whilst replacing the hose that had split I noticed that the the intake had some things that needed my attention. Firstly the yellow...
-
-
Nassau65 replied to the thread Side Louvres.Nicely polished 1969 style side pipes. They are my side pipe of choice for all 1968-82 models. Polished up they do look extremely nice. -
Roscobbc replied to the thread Side Louvres.Wouldn't expect anything less from a former Fix Or Repair Daily exec' -
Now you've done it Ross. I wouldn't have thought of fabricating a pair of these, but now you've suggested it I'm going to have to try...
-
Steven Smith replied to the thread Side Louvres.Always a good idea to design it in CAD first, Cardboard, Aided, Design. 😂
-
Now you've done it Ross. I wouldn't have thought of fabricating a pair of these, but now you've suggested it I'm going to have to try...
