Latest activity
-
teamzr1 replied to the thread Clarkys Corvette C5.Should be easy if you go to rear fogs and follow the wiring and then splice wires to make up the front 2 pin connectors to fit the... -
teamzr1 replied to the thread Clarkys Corvette C5.Here is a list for 2004 C5 as what was RPOs https://www.corvettesalvage.com/2004-corvette-rpo-codes/ and...
-
-
CClarky replied to the thread Clarkys Corvette C5.@teamzr1 Hi there, yes it has the switch that has been appropriated for the UK standard rear fog light. I was hoping to have these as a...
-
DDue to air leaking, is how long in time/miles it was as the leak would cause real lean AFR and cause PCM to command far more fuel...
-
teamzr1 replied to the thread Project black hole sun..Due to air leaking, is how long in time/miles it was as the leak would cause real lean AFR and cause PCM to command far more fuel...
-
teamzr1 replied to the thread Clarkys Corvette C5.On the far left of dash do you have the switch for fog lights by the switch for hatch release ? Do you see on the sticker of console...
-
-
DDorsetsteve replied to the thread Project black hole sun..Very much understood coming from a twin turbo car with over 30ft of induction piping and the MAF at the start! All sorted now and hence...
-
DThe MAF reports to the PCM the amount of air mass flowing through it, the higher the engine RPMs is the more air mass will be flowing...
-
teamzr1 replied to the thread Project black hole sun..The MAF reports to the PCM the amount of air mass flowing through it, the higher the engine RPMs is the more air mass will be flowing...
-
CClarky replied to the thread Clarkys Corvette C5.So I have had the front end repaired and repainted and I also a while ago bought 2 new/old stock front fogs that the car was optioned...
-
-
DDorsetsteve replied to the thread Project black hole sun..Thanks for that. I had the appropriate hose clamp so dealt with that straight away. PCV makes sense.
-
Wouldn't expect anything less from a former Fix Or Repair Daily exec' -
-
Blackzed replied to the thread Project black hole sun..Green one is the PCV connection as far as I know. You need the hose clamp on otherwise its possibly sucking air in. The rubber part is...
