Latest activity
-
antijam replied to the thread Recurrent misfiring problem.Finally got the intake manifold back on my engine. No longer having the strength to lower and accurately position the 40 lb. lump over... -
-
teamzr1 replied to the thread Recurrent misfiring problem.Couple other ways to cool down the gas into the CARB https://www.jegs.com/i/Quick-Fuel/793/300-4013QFT/10002/-1... -
Roscobbc replied to the thread Recurrent misfiring problem.I get percolation in hot summer weather.....despite fuel pump with flow back to tank return and fuel lines wrapped with insulation. The... -
CaptainK replied to the thread Recurrent misfiring problem.I use an insulated "riser" type thing between my inlet and carb. I was getting percolation issues, don't any more. That was years... -
We thought of you, John, given your interest in AFR! The plot shown is at WOT - the car is pulling hard! It is really awe inspiring to...
-
A couple of weeks ago my good friend Mark Eaton and I took a ride out to Mill Lane Speedshop, near Finchingfield in Essex to put my...
-
BobbyV8 replied to the thread Acrylic top options.Here's the link, 8 minutes in for the roof -
BobbyV8 replied to the thread Acrylic top options.I was thinking about having a go myself but it's a hell of job doing it by hand. There is a Scottish guy on YouTube who did it. If I can...
-
As it was raining all day today, it seemed like a good time to see if I can stop the transmission oil leaking from the rear seal. With...
-
As above, my top has the usual crazing/poor finish to the clear section. No other damage or issues, has anyone either had a go at...
-
As above, my top has the usual crazing/poor finish to the clear section. No other damage or issues, has anyone either had a go at... -
teamzr1 replied to the thread NONE EXISTENT AFTER SALES SERVICE.GM's database does not show your VIN #, says invalid I assume being a UK C8 there is no tracking of what or IF any TSBs for 2024 have...
-
