Latest activity

  • Invetterate
    Invetterate reacted to Steven Smith's post in the thread Painting my C4 with Like Like.
    Needed to get the rear painted today so gazebo up and made shower proof 🤞🏻 Two good coats applied before 10, it's already "dust dry"...
  • Steven Smith
    Steven Smith replied to the thread Painting my C4.
    Needed to get the rear painted today so gazebo up and made shower proof 🤞🏻 Two good coats applied before 10, it's already "dust dry"...
    • IMG_20260830_100617.jpg
    • IMG_20260830_100626.jpg
    • IMG_20260830_131743.jpg
    • IMG_20260830_131748.jpg
    • IMG_20260830_131756.jpg
    • IMG_20260830_131803.jpg
  • Roscobbc
    Roscobbc replied to the thread Muncie Shifters.
    Nearly 3 times what mine cost (although that was 20+ years ago) as I recall.........😳
  • antijam
    antijam replied to the thread New master cylinder.
    There are a pair of port plugs here available in the UK that have the correct threads so should fit the Corvette cylinder. Not too...
  • Forrest Gump
    Forrest Gump replied to the thread Muncie Shifters.
    You expect a good gearshift for this money, and has gone up another couple of hundred dollars since I got mine...
    • IMG_1883.png
  • Mike W
    Mike W replied to the thread info on C1 's in UK.
    Ah, OK, fair enough. I wasn't referring to lens colour, I read the MOT note as it being OK to for pre-Sept '65 cars to have combined...
  • Choosing a name is hard
    Hi Has anyone in the UK ever primes a new master cylinder before fitting it to the car? The master cylinder I had didn’t come with...
  • Forrest Gump
    Forrest Gump replied to the thread Muncie Shifters.
    Thats why I put a thin washer in - so that the moving parts don't actually touch the split pin and cause it to wear, and it's all...
  • Roscobbc
    Roscobbc replied to the thread Muncie Shifters.
    Paul Super661 makes much of the poor retaining spring clips in one of his of his tutorials and suggests the use of/and offers his own...
  • Forrest Gump
    Forrest Gump replied to the thread Muncie Shifters.
    Much is made of the upgrade to steel bushes - but they're only going to improve shift quality if the “standard” nylon ones break-up and...
  • Invetterate
    Invetterate reacted to Llewelyn's post in the thread Painting my C4 with Like Like.
    Super progress!! Hats off to you Sir! :)
  • Invetterate
    Invetterate reacted to Steven Smith's post in the thread Painting my C4 with Like Like.
    High level brake light housing, fuel filler cap and side vents all prepped and painted in the garage. That's straight "out of the...
  • Corvette
    Corvette replied to the thread info on C1 's in UK.
    Mike at no point do I mention indicator lens colours, I was reffering to a flashing rear brake light. A 1959 has the same bulb for...
    • IMG_3670.jpeg
    • IMG_3671.jpeg
  • Mike W
    Mike W replied to the thread info on C1 's in UK.
    Sorry, not correct. I only know this because I used to know someone with a '59 and he didn't modify the lights. This is taken straight...
  • Corvette
    Corvette replied to the thread info on C1 's in UK.
    Standard 5 3/4" halogen. From ebay uk. https://www.ebay.co.uk/itm/227310765668
Top