Latest activity

  • D
    Dorsetsteve reacted to teamzr1's post in the thread Petrol with Like Like.
    For those who like the techie detail The PCM has two main timing tables 1 is High Octane and other is low octane When the PCM sees...
  • Roscobbc
    Roscobbc reacted to teamzr1's post in the thread Petrol with Like Like.
    For those who like the techie detail The PCM has two main timing tables 1 is High Octane and other is low octane When the PCM sees...
  • teamzr1
    teamzr1 replied to the thread Petrol.
    For those who like the techie detail The PCM has two main timing tables 1 is High Octane and other is low octane When the PCM sees...
    • EthanolTst.jpg
    • lowhighoct.jpg
  • N
    All great info love this forum thanks guys
  • Custom exotics
    It's fairly straight forward just done a 76 locate the hi and low beam wires as they come into engine bay area near main bulkhead...
  • johng
    I've done this see this post How to add a relay to your main beam circuit
  • Roscobbc
    Roscobbc replied to the thread Petrol.
    If one is really concerned about the content of the fuel being used and not convinced that petrol retailers are being informative of its...
  • Roscobbc
    Roscobbc reacted to CaptainK's post in the thread info on C1 's in UK with Like Like.
    Yup, the four main rear lights do main rear light, braking, and indicators. I must confess I've not seen it working directly as I'm the...
  • CaptainK
    CaptainK replied to the thread Petrol.
    As above E5 and E10 etc doesn't means it has to have exactly 5% or 10% ethanol etc. It means "up to" that amount, but not over the...
  • CaptainK
    I'm not sure if this is an answer, but I fitted LED bulbs in my Corvette so it reduces the power required for the bulbs. My hope was...
  • CaptainK
    CaptainK replied to the thread info on C1 's in UK.
    Yup, the four main rear lights do main rear light, braking, and indicators. I must confess I've not seen it working directly as I'm the...
  • N
    Hi all I have flickering headlights when I go to main beam,I have badgered poor old Gavin as I thought I had purchased the light switch...
  • Mr. Cricket
    For those asking to be part of the Saturday night meal at the Crown pub in Pooley Bridge they have now sent me their menu. Planning on a...
  • U
    still available ?
  • Steven Smith
    Steven Smith replied to the thread Painting my C4.
    Yes but panel wipe before initially sanding to remove and polish or wax so as not to sand it into the panel.
Top