Anyone have a Tech 2 scan tool left over from C5 ownership they want to part with ?
- Thread starter C2 VET
- Start date
C2 VET
CCCUK Member
Okay thanks but I think I need a GM Tech 2 that is capable of cycling my ABS pump to bleed it.
This is the AI description that explains it better than I can.
"The GM Tech 2 is the legendary, factory-level diagnostic scan tool used by General Motors dealerships to service vehicles from 1992 to 2014. Originally manufactured by Vetronix (and later Bosch), authentic vintage units are no longer in production, but highly popular "clone" units are widely used by DIYers and mechanics today"
This is the AI description that explains it better than I can.
"The GM Tech 2 is the legendary, factory-level diagnostic scan tool used by General Motors dealerships to service vehicles from 1992 to 2014. Originally manufactured by Vetronix (and later Bosch), authentic vintage units are no longer in production, but highly popular "clone" units are widely used by DIYers and mechanics today"
teamzr1
Supporting vendor
That model is mostly a basic DTC code reader and does not do service functions
teamzr1
Supporting vendor
The GM Tech II would require that it is loaded with the software for your year and model
If not than you have to pay a service of GM's to obtain that software and load the Tech II to
be able to use it on your C5
The service is not cheap but does allow for shorter timeframes of use
One way is a cheap costing scanner that is biased for GM vehicles
This one I have and just checked it for my C5 and the ABS/brake bleeder function does exist
Cost $149 US at :
Or try the Amazon in your country or other stores selling this
Allows free software updates
AUTOPHIX 7210P+ OBD2 Scanner for GM with All Reset Services
| Fit for GM/Chevy/Buick/Cadillac. Support all system scan and all maintenance service. | |
| Operating System | gm scanner - full system and all service |
Steven Smith
CCCUK Member
Do you definitely need a Tech 2 ?
Doesn't a C5 have a standard OBD 2 port?
Would a vehicle specific OBD 2 scanner work, I know a C5 owner that used a Autel AP200 to calibrate the steering sensor and it works fine, they are only around £50 and you "lock it" to a vehicle manufacturer on first use.
You can asked Autel if it will do what you want via their website.
I have a all makes / all model vehicle scanner we can try if your near Essex. I does ABS bleeding and lists GM in the vehicle selection
C2 VET
CCCUK Member
Thanks for the replies,
Steven: I don't specifically need a Tech 2, I need a scanner that has hot functions that you need to cycle the ABS pump to bleed it properly.
I'll look into the Autel AP200, I'm in North Norfolk.
I'll also look into the Autophix scanner that you mentioned teamZR1 thanks.
When you say the Tech2 needs to be loaded with software, would that be the 32 bit card that is supplied by some sellers ?
Steven: I don't specifically need a Tech 2, I need a scanner that has hot functions that you need to cycle the ABS pump to bleed it properly.
I'll look into the Autel AP200, I'm in North Norfolk.
I'll also look into the Autophix scanner that you mentioned teamZR1 thanks.
When you say the Tech2 needs to be loaded with software, would that be the 32 bit card that is supplied by some sellers ?
Steven Smith
CCCUK Member
Also look at the Mucar range of diagnostic scanners as they have two way communication with the car
Steven Smith
CCCUK Member
I will take my scanner to a American car show tomorrow and see if a willing club member will let me plug it into their car and see what functionality is available.
And let you know tomorrow, it was less than £200 because it's wired and not Bluetooth.
And let you know tomorrow, it was less than £200 because it's wired and not Bluetooth.