When you have a dim readout on your A/C modual for your C-5, the common problem is that the soder has become broken. It need to be re-sodered. Take the modual out of the dash and it will be the uppermost circuit board. Need help? Just ask me!
I have had to re-solder the resister packs on several HVAC controllers for C5s
Notice below on image of 1 I worked on to be sure to re-solder the five ones I show
Very little time to you doing this rather then big bucks finding a replacement
When you have a dim readout on your A/C modual for your C-5, the common problem is that the soder has become broken. It need to be re-sodered. Take the modual out of the dash and it will be the uppermost circuit board. Need help? Just ask me!
I took the mod out, relatively easy. Doing the sodering was the hard part. Just have to be patient with yourself but otherwise a piece of cake to do (easy!).
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.